Denon DCD-600NE CD Player with AL32 Processing

Overview

Designed for the aspiring music enthusiast, enjoy your favorite CD’s with the Denon DCD-600NE CD Player. With Denon-proprietary AL32 Processing technology, combined with an innovative circuitry structure, ensure recordings are accurately reproduced and beautifully faithful to the original sound. More than a CD player, the DCD-600NE supplies the even higher quality audio signals to the amplifier. Vibration-resistant design reduces adverse audio effects of heavy components within amplifiers, guaranteeing the sound quality meets rigorous Denon standards. And with a more than 100-year legacy of crafting audio components, trust Denon to achieve amazing sound that exceeds your expectations.

AL32 PROCESSING

The DCD-600NE is equipped with AL32 Processing, a proprietary analog waveform reproduction technology from Denon. AL32 Processing utilizes data interpolation algorithms, which add in the points that should exist before and after large quantities of data, smoothing out the waveform and restoring information that was lost during the digital recording. The resulting playback is highly detailed, free of interferences, richly expressive in the lower range and beautifully faithful to the original sound. Listen to songs as the artist intended.

Advanced Circuitry with Minimized Signal Paths

The circuit patterns in the DCD-600NE are thoughtfully engineered to make signal paths as short as possible. With layered circuit boards and shorter circuits, the interference between circuits and left and right channels is reduced, and the adverse influences on audio signals are minimized. As a result, the circuit paths in the DCD-600NE reproduce sound that’s clean, highly transparent and faithful to the original recording.

Vibration-Resistant Design for Pristine Sound

Vibration-resistant design reduces the adverse audio effects of heavy components within amplifiers so that sound quality meets Denon standards. The power transformer is fitted immediately above the insulators to prevent unwanted vibration. By placing the transformer close to the foot, the vibration surrounding the chassis is reduced, resulting in pristine sound. This design is referred to as Direct Mechanical Ground Construction. With a metal bracket connecting the CD mechanism and chassis to the high-density feet, unwanted resonance is further reduced to deliver pristine sound.

Direct Mechanical Ground Construction

The DCD-600NE features a metal chassis to achieve high mechanical stability to suppress vibration caused by disc rotation.

Optical Output

The DCD-600NE features one Optical output to connect to the digital input of an amplifier or AV receiver.

Pure Direct Mode

Listen with Pure Direct Mode on the DCD-600NE. Pure Direct Mode deactivates the digital output and the display which might otherwise color the signal. What you hear is a cleaner, more detailed, accurate sound.

Features:

• Technical Information
• Channels: 2.0 Ch
• Frequency Response: 2 Hz – 20 kHz (sampling frequency: 44.1 kHz)
• Dynamic Range: 101 dB
• Signal-to-noise ratio: 112 dB
• Total Harmonic Distortion: 0.0030%
• General
• Power Supply: AC 120V, 60kHz
• Power Consumption: 13W
• Standby Power Consumption: 0.3W
• Auto Power Off: Yes
• Analog Output: 2ch
• Digital Optical Output: x 1
• Maximum Dimensions (W x H x D): 17.09” x 10.75” x 4.21”
• Weight: 8.82 LBS
• UPC: 883795004916
• MPN: DCD600NEBKE3